posted January 14, 2003 11:07 PM
Well anyway i have a ford probe that pushes like **** but i cant run ANY aftermarket parts. Im scared to stagger the fornt too much...i think i might take out the tranny with too much, what can i do?
buckseight Dirt Maniac
Total posts: 106
posted January 15, 2003 06:46 AM
i used to run a v w rabbit had 1 1/2 - 2" frt. stagger never worried about the tranny but i put alot of camber in it and took out a cv joint once.
SKULLHULL Dirt Full Roller
Total posts: 69
posted January 16, 2003 08:26 PM
is your prabe fwd? if so toe out the r rear or chain down the left rear so there is no body roll car will get very loose rember the looser the faster on fwd. if you need i will explain more about the chain.
Darcy Dirt Full Roller
Total posts: 54
posted January 20, 2003 06:37 PM
1 inch stagger is all you need on a front wheel drive car and plenty off camber on the rite rear and hold that left rear down with a good shock.
stay side ways
abrusse Dirt Roller
Total posts: 24
posted January 23, 2003 10:49 PM
the chain is a great idea, i'll try that. I have adjustable shocks at all four; i'll report back as to how they work for me.