Visit The Dirt Forum for More Information

Author Topic:   need a new cam
smiley
Dirt Roller

Total posts: 20
posted January 02, 2003 10:50 PM
I need a new cam i need some help.I need a good cam does any know of a good one? I run a 1/4 mi simi banked dirt not clay. Car weigh 2200 pounds with a 7 to 1 fanial drive.500 carb and a header

SKULLHULL
Dirt Full Roller

Total posts: 69
posted January 02, 2003 11:25 PM
you forgot to post the type of car engine size ect cant help if dont know what you runing. but if you run ford 2.0 or 2.3 all you need is a 400 to a 450 lift with 1.65 to 1.7 intake valve and 1.5 to 1.55 exhaust valve shave block to 0 deck . this is a good combo

smiley
Dirt Roller

Total posts: 20
posted January 03, 2003 09:52 AM
A have 2.3. The head has beem milled 150

b4racing
Dirt Maniac

Total posts: 180
posted January 03, 2003 01:56 PM
schneidercams.com Tell them all the info and they will custum grind a cam for you. they are very good.

superdave
Dirt Forum Racer

Total posts: 89
posted January 05, 2003 03:02 PM
A guy I helped collected four straight track championships in mini stocks. While we used a bunch of different cams and engine combos we always wound up back to our one engine with a stock bore and stroke and a Lunati cam. The number is 32902. .508 lift and 252 degrees duration. Buy the spring kit that goes with it and get the spring seats cut for them. After running ported strokers with solid cams and big carbs the Lunati motor always ended up back in the car.
www.lunaticams.com

Good luck,
Superdave

------------------
Superdave
www.salinaspeedway.com

nw15x
Dirt Full Roller

Total posts: 42
posted January 05, 2003 07:56 PM
what does a cam and followers kit go for these days

smiley
Dirt Roller

Total posts: 20
posted January 05, 2003 08:30 PM
around $350 cam only $140 to $180. does any one run a esslinger 2270 and how do you like it?

smiley
Dirt Roller

Total posts: 20
posted January 08, 2003 07:06 PM
i also need to turn 7600 to 7800 rpms

Back to the Archives