posted November 29, 2002 07:38 AM
Has anyone run a ram coupler clutch? What is your opinion? I am considering buying one.
trey_#23 Dirt Maniac
Total posts: 141
posted December 25, 2002 12:20 AM i never really understood the hole ram coupler thing so if you get some good info hook me up
noyb6974 Dirt Roller
Total posts: 11
posted December 25, 2002 01:41 AM
We bought a ram coupler and ran it on dirt track for one test and tune. We immediatly sold it and went for the goldstar ultralite custom. Flywheel, pressure plate, throw out bearing and clutch disk all weigh 12 lbs! The ram coupler is harsh on drive components. It is also an initial engagement clutch which means most of the time the car will still move with the clutch depressed in gear. It gives you just enough to switch gears. Works good with bert and brinn trannies in I-4 mods though. The drawback to the goldstar is its just shy of 1000 clams.
fast phill Dirt Full Roller
Total posts: 30
posted December 25, 2002 01:49 PM
the ram is a good set up if you get used to it push clutch in half way for neutral push it all the way in to start going once moving let the pedal all the way out just a touch over 400 and only weighs 5 pounds i will never run anything else.