Visit The Dirt Forum for More Information

Author Topic:   setup help
Dirt Full Roller

Total posts: 46
posted June 02, 2002 01:38 PM
I have a push at throttle pickup in #2 turn. It is a little loose off #4 turn but not to bad. Springs-800RF,400LF,150RR,200LR. Goodyear tires[track rules]. No rear stagger, even 1/2" rear stagger makes it real loose. 3/4" front stagger. Car is great until the tires heat up. Have 9 degrees neg. camber in RF and 1 1/2 degrees pos. camber in LF. Thinking of changing the LF spring to a 700 and taking out about half of the RF camber.
Does anyone think this will help.
Have run 4 races and finished 4th in all of them. It has won all of the heat races going away. Heat races are 8 laps.

Dirt Freak

Total posts: 233
posted June 06, 2002 06:29 PM
You have an awful lot of split up front. I would increase LF spring rate. Yes, you may have a tad too much camber, but try the springs first and change one thing at a time. GL

Back to the Archives