Visit The Dirt Forum for More Information

Author Topic:   MELLING OIL PUMP
AJ GARBE70
Dirt Moderator

Total posts: 59
posted September 07, 2001 10:40 PM
I GOT A NEW 1 TODAY AND IT ONLY CAME WITH 1 GASKET WITCH WAS THE PUCK UP TUBE GASKET AND I DID NOT GET NO HARD WARE WITH IT ANY BODY ELSE GOT ONE LIKE THISE WHAT KIND OF HARDWARE SHOULD I USE AND WHAT SHOULD I TORK IT AT THANKS AJ GARBER RACING

ministock
Dirt Roller

Total posts: 14
posted September 09, 2001 08:00 AM
yes i run the same pump and if i remember right there is only one gasket used and it is for the pickup i used the tourqe settings out of the hyanes manual as for the bolts used old ones out of old pump.good luck.

AJ GARBE70
Dirt Moderator

Total posts: 59
posted September 09, 2001 12:23 PM
thanks ministock

AJ GARBE70
Dirt Moderator

Total posts: 59
posted September 09, 2001 05:50 PM
but do i make one to go between the block and pump

AWSOME4
Dirt Roller

Total posts: 21
posted September 09, 2001 06:55 PM
NO YOU DO NOT USE A GASKET BETWEEN THE BLOCK .IT IS WHAT'S CALLED MACHINE FIT.IT DOESN'T TAKE A GASKET


AWSOME4

AJ GARBE70
Dirt Moderator

Total posts: 59
posted September 09, 2001 09:52 PM
thanks awsome4

Back to the Archives