posted September 05, 2001 10:12 PM
i have got a mustang 3 fox body run on 1/4 mile 22 deg high banked track but also run other tracks with not so much banking what would be a good spring weight setup.also how do you guys set the front end up i notcied mine is straight on on the right front but the left front is toed out about 1/8 inch shouldnt it be right the opposite.
KWTracer Dirt Forum Racer
Total posts: 78
posted September 06, 2001 07:28 AM
I would run -3 to -5 degrees camber on the right side. You adjust the the camber by moving the top of the strut. If your unable to get the amount of adjustment, you can find a thunderbird lower control arm. They are longer, and bolt right up. Or buy some caster/ camber plates. I like 1/8 to 3/8 toe out. Turn your steering wheel an 1/8in. to the right and the right will be toed out an 1/8 in. What I'm saying is there is no particular side that is toed. As far as spring weights. Cant tell you. Depends on your weights, percentages, etc.
AJ GARBE70 Dirt Moderator
Total posts: 59
posted September 06, 2001 03:28 PM
you can loosen up your 3 bolts on the top of the strut and push the strut in a little it will lean the top of your tire in it will help a little it dont go in to much but it may help you