posted April 27, 2003 03:37 PM
Our division requires us to run a quadrajet carb. Running a 355 motor. Any suggestions on what jetting to run. Seems as I get to the end of the straight away it likes to burp a little. Running a 79 jet right now.
KPLugnut Dirt Freak
Total posts: 408
posted April 27, 2003 08:05 PM
The problem isn't in your primary jetting, then. It'll be correctible by altering the secondary metering rods and secondary air flap spring tension, as well as making sure you are not just running the bowl dry. A primary jet in the 76-79 range should work just fine.