Visit The Dirt Forum for More Information

Author Topic:   piston help
j mod
Dirt Full Roller

Total posts: 34
posted April 18, 2003 07:14 PM
i have a small journal 327 with what i think is a standard bore piston but not sure...number on inside of piston os 740 P these are cast piston....cylinders look like there in good shape so i just wanted to hone it and put different pistons in it

thanks

Eljojo
Dirt Freak

Total posts: 273
posted April 18, 2003 10:21 PM
Before you "guess" and possibly make an error you'll regret, Why not load up the block and take it out for a burger and fries. While you two are riding around, take the time to pass by your favorite machine shop and ask one of those guys to measure your cylinders. You might find that your cylinders were out of spec for the rebuild you were planning and need to be bored oversize.

jnewman44
Dirt Full Roller

Total posts: 72
posted April 19, 2003 11:47 AM
The odds of finding a 327 with a usable 4" bore is less than winning the lotto.

rico 08
Dirt Freak

Total posts: 372
posted April 19, 2003 12:22 PM
I've been looking for a good standard bore 350 block for a while myself.

Back to the Archives