CUSTOMPERFORMANCE Dirt Forum Champ
Total posts: 639
posted April 14, 2003 07:27 AM
I need a regulator diaphram for a C@S regulator (belt drive one) and when i called their # it was different business. Can someone else please tell me where to get the diaphram, it has a brass ball on the end that seals up on the housing. I got a regular holley diaphram and it did not have the brass ball attached to it and didnt look like it would seal up. Is this something they made and i will have to make myself by modifiying a regular one? I can take a pic and send it to anyone who needs to see it.
dirtbuster Dirt Freak
Total posts: 353
posted April 14, 2003 09:27 AM
I ran into this same problem. I had a Holley regulator with the brass ball diapghragm and when i ordered a new diaphragm kit from holley the diaphragm in it just had this little pin on the bottom of it. I called holley and they told me that they had revised teh design and that the new diaphragm should would in teh old regulator but I didnt feel comfortable with it so i got a new Barry Grant regulator instead. I didnt take it apart but from looking through the end of it. it would appear it has the same ball type diaphragm. I dont know whether the BG diaphragm kit will work in the holley but it might be worth trying.
Monster Dirt Maniac
Total posts: 135
posted April 14, 2003 12:21 PM
They are still around. 636-723-4996, HWY B, St. Charles, MO. We had an area code change a while back, maybe this is what gummed things up.