Visit The Dirt Forum for More Information

Author Topic:   4412??? need help
budman14
Dirt Roller

Total posts: 11
posted March 07, 2003 08:12 PM
i have a 4412 on my car well it worked great untill it sat all winter and now the squirter is not working alll the fuel is coming out of the venturis i think thats how its spelled anyways i took the squirter off nothing is visible that would be blocking the fuel as i tryed to put the squirter back on i couldnt get it on for the stinking choke how can i remove the choke without damageing any other part of the carb all help an info is apreciated trying to get this thing going bye sunday have all day test an tune thx again for the help an excuse the lousy spelling

KPLugnut
Dirt Freak

Total posts: 408
posted March 08, 2003 06:15 AM
My recommendation would be a complete rebuild. The fuel that was left in the carb has dried up and plugged many critical circuits internally.
The least of your troubles is that squirter. But to remove the choke, since rarely is a choke left on in any racing application, you first pull the choke butterfly out of the shaft. If there are screws holding it to the shaft, remove them.
The choke linkage arm that hooks to the shaft will need to be removed from the shaft (and its hole going down thru the side of the carb). Simplest way is to bend the tab on the choke shaft slightly to unhook the linkage. Then slide the shaft out.
This will allow better access to the squirter area in the carb. Make SURE the little squirter check valve needle is still down inside where the ***** goes.
Also, the hole in the side of the carb where you removed the choke linkage arm will need to be closed off to keep unfiltered air and dirt out.
Some just plug it with silicone, but there is a plate made to close it off neatly.

Hope that helps, and if you'd like further assistance in rebuilding your carb, feel free to give me a shout.

Dayton Umholtz, owner
Kinetic Performance http://www.kineticperformance.net

Back to the Archives