Visit The Dirt Forum for More Information

Author Topic:   B-Mod Motor Combo
Wallydog9g
Dirt Roller

Total posts: 11
posted February 25, 2003 05:44 PM
Ok, here is what I am thinking on purchasing.
I have Chevy X rods reconditioned with ARP Bolts
350 Block bored to 355
Speed Pro Hyperutectic pistons
Scat Cast Crank
1.94 heads
Stamped SteelRoller Rockers (car is right at weight)
Intake has the center devider removed (4BBL)
the 4412 carb
Going to have Comp Grind a custom cam for 6200-6700 rpm on a 1/2 mile short straight track. How do you guys think this motor will run and what problems should a first time builder look for. I have been building by own kart engines for years and we sold out to move up and everyon is swamped and I love building my own motors. Any suggestions would be great
thanks

ez2bcheesy
Dirt Roller

Total posts: 16
posted February 25, 2003 07:41 PM
Sounds like a good combo..If you are racing in Iowa your intake would be illegal. No mods of any kind!!

Wallydog9g
Dirt Roller

Total posts: 11
posted February 25, 2003 07:48 PM
havent done it yet but i wont now that you say its illegal... how much hp am i looking at with this combo?

ez2bcheesy
Dirt Roller

Total posts: 16
posted February 25, 2003 07:57 PM
Not sure on horsepower. But just starting out you need to go with something reliable that you won't have to worry about. Pin the studs on your heads also! Remember most guys that you are gonna be racing with are gonna be rookies also!!!

Back to the Archives