Visit The Dirt Forum for More Information

Author Topic:   Windage Tray
mrutrac
Dirt Roller

Total posts: 18
posted January 21, 2003 08:02 AM
Need some advise...

I read all the posts that had windage trays mentioned in them.... looks like its a very good thing... just a few ?'s

1. Which one for a sbc 350 9:1? I looked in Speedway and there are several.

2. How do you install? I just finished putting the pistons/rods/crank in so i don't want to do any drilling.

Thoughts?

Mrutrac

30rulz
Dirt Roller

Total posts: 24
posted January 21, 2003 10:07 PM
they sell a stud kit that takes the place of your main cap bolts and has extra nut for the tray

spanky43
Dirt Roller

Total posts: 22
posted January 21, 2003 11:34 PM
30rulz is right, get a stud kit and I prefer a moroso, seems to be made better and fit better and it does help alot, i also use a lifter vally baffle to keep the hot oil off the bottom of the intake keeping it as cool as possible, use oil restricters in the rear if you run a SOLID lift cam, NOT HYDRALIC

mrutrac
Dirt Roller

Total posts: 18
posted January 22, 2003 07:08 AM
Many Thanks!

MruTrac

Back to the Archives