posted January 12, 2003 08:14 PM
im thinking about porting my heads for my 350 sbc. Is porting easy or hard to do? i have 76cc heads. What can i gain by porting them? If i do port them, Do you they have to be exactly alike? Is there a place online with a full size templet i could print out and use? Thanks!
posted January 21, 2003 12:55 AM
I ported and polished my heads and found it to be really easy but time comsuming. All i used was a dremel with the flex attachment. Just do not polish the intake because your fuel will not atomize with the air and you will lose horses. Hope this helps.