Visit The Dirt Forum for More Information

Author Topic:   MY CAM ***** ! NEED NEW SELECTION! HELP!
High Velocity Sports
Dirt Roller

Total posts: 5
posted June 11, 2002 07:56 PM
Hey guys, I can't deviate to much from the rules here. 20" Vacuum, Idle @ 600rpm, 2 barrel, stock 350 heads, single exhaust, 8.8 to 1 compression with a 308 gear. track is 3/8 - 12 degree clay. I am running a comp cams advertised duration is 212/218 @50 and 447-462 with a 112 lobe center. 1.5's all the way around. The thing won't pull above 4100 out of the corner. Ideas?? New Cam!

Dirt Forum Racer

Total posts: 98
posted June 12, 2002 12:03 PM
What trans in what gear are you running? Sounds like you may need a lower(higher number)gear.Maybe around a 6.20 or 6.50.

Dirt Freak

Total posts: 230
posted June 12, 2002 03:04 PM
Had the same problem after an engine swap once. I had the wrong rotor in the dist. It'd run to 4200rpm and go flat. Easy fix too, after lots and lots of searching for the problem.

Back to the Archives