posted May 30, 2002 10:37 PM
How do you set the air mixture screws on the bowl? Mine was accidently adjusted and car seemed to run real lean. I need help, alot of help!!!!
Gene Dirt Freak
Total posts: 230
posted May 31, 2002 05:09 PM
I assume you are on gas. Use a tach and set the screws so you have the best idle. Start with them 1 1/2 turns out. set idle ***** at 800 rpm, slowly back one ***** out til the idle is constant, then do the other. you will more than likely turn each ***** 2-3 times. Now set the float with the engine at steady 2000 rpm.