Visit The Dirt Forum for More Information

Author Topic:   main bearing saddles
Dirt Full Roller

Total posts: 42
posted May 18, 2002 08:54 PM
i need help fast,here's my problem! on my 350 block, on two main saddles i must have spun a bearing last season,now on number 2and 3 i have gruves in them. so i would like to know can i change the main caps an get them alined honed to be round for good bearing clearences. thanks for help fast

Dirt Full Roller

Total posts: 30
posted May 19, 2002 08:34 AM
As long as the block is repairable just take the block to the machine shop that is going to line hone or line bore your block. They should have a bunch of old caps from cracked blocks. It is just a matter of going through a few and finding ones that are somewhat close to start with, then line boring the block.

Good luck...Chuck

Back to the Archives