Visit The Dirt Forum for More Information

Author Topic:   SBC aftermarket heads ?
DEEDDUDE
Dirt Maniac

Total posts: 111
posted February 08, 2002 06:10 AM
Anyone have experience with the SR Torquer heads or the Dart Iron Eagles w 1.94 intake valves. We are limited to 1.94 intake. These are the only two no-oem heads legal. My Vortecs are just paperweights now. Anyway, how much can be angle milled off these heads. The SRís start out at 58cc. and the Dartís are 72cc. 355 Chevy, 3400lbs., street stock. Turn 7200 on 3/8 track. Thanks for the help. Deed

dirttrackracer
Dirt Newbie

Total posts: 0
posted February 09, 2002 05:52 PM
How much do you want for the paper weights?

dirtracer17
Dirt Forum Racer

Total posts: 88
posted February 11, 2002 07:36 PM
I would be interested in the paperweights also!

DEEDDUDE
Dirt Maniac

Total posts: 111
posted February 11, 2002 09:06 PM
Thanks for the response guys, but Iíll probably put them on a street motor for my old truck. I got close to $800 in them and there bare. I had some mods done to them for racing but they are illegal at the new track I race. Deed

Back to the Archives