Visit The Dirt Forum for More Information

Author Topic:   Power Steering Pump
Rod65
Dirt Newbie

Total posts: 4
posted December 17, 2001 02:01 PM
A couple of years ago I bought one of those
kits that has the pump, mount, remote tank, all
ready to go. I started leaking fluid and found
out that that the pump casting is busted in the
return hose boss.
Does anyone know what the part number or model that this pump is off of?
What modifications to the stock pump will I have to make to get the hoses to mount up to the remote tank.
Thanks for any help
Rod65

Racer14K
Dirt Freak

Total posts: 247
posted December 17, 2001 03:10 PM
That type of pump was used on:
1985-1993 Chevy S10 with 4cyl.

1982-1985 Cadillac Deville,Eldorado,Seville,Fleetwood.

1982-1986 Camero with 4cyl.

1982-1984 Cavalier with 4cyl.


Gene
Dirt Freak

Total posts: 230
posted December 17, 2001 04:15 PM
Try some Loctite 82515 epoxy. The stuff is like JB weld on steriods.

techmaster35
Dirt Freak

Total posts: 259
posted December 28, 2001 10:25 PM
you could weld the hole shut but it might crack and break again. you might just have to get another pump but i wouldnt try to retro-fit it.

6pack
Dirt Maniac

Total posts: 128
posted December 29, 2001 05:41 PM
Sounds like a Profile pump. You can get them at different places, but Speedway Motors has them for $144.95. Part #91032902, add a -8, or -10, for your supply line size.

Back to the Archives