Visit The Dirt Forum for More Information

Author Topic:   360 motor
Dirt Newbie

Total posts: 4
posted June 04, 2002 08:52 PM
low budget racer..need to build my own 360 motor..just a good steady motor..if anyone out there has suggestions etc..cranks,throw rods,pistons.please e-mail me at jason

Dirt Full Roller

Total posts: 35
posted June 27, 2002 12:21 PM
Go to this website, they have some 360 engines for sale. If your not interested in buying they might be a good source for info on what will work and what won't.

[This message has been edited by kong (edited June 27, 2002).]

[This message has been edited by kong (edited June 27, 2002).]

Dirt Newbie

Total posts: 2
posted July 24, 2002 08:38 AM
heres some thoughts on a 360 sprint motor i have some working knowledge of engines so here goes 1 use a 4.i25 bore block with the necessary mods or a bowtie 2 3.3500 crank poss with small rod journals 3 ascs cyl head 4 cp pistons with total seal rings 5 6.00 or 6.125 crower rods 6 huggins cam these are just the basic package i have talked to some long term sprint mech,s about if this combo sounds interestin i would talk to a sprint car engine builder & get his feedback the one mech i talked to who uses WESMAR MOTORS SAID WESMAR HAS RUN THIS SMILIAR COMBO ON THE DYNO & found it to be one of the strongest "360" to run i know that this combo has been built by RON SHAVER for use by a lot of the left coast racers hope this helps scruffie

Back to the Archives