Visit The Dirt Forum for More Information

Author Topic:   Bullitt 4 bar setup
AlanP2
Dirt Roller

Total posts: 5
posted December 26, 2002 09:42 AM
Just getting started in late model,purchased an older Bullitt 4 bar. The only setup information I got with the car was some scaling sheets with only a few clues as to shocks and springs.Anyone have the Bullitt setups? I have checked the Bullitt racecar site and tried multiple emails with no reply.
Thanks for any help, Alan

Tech
Dirt Newbie

Total posts: 1
posted December 28, 2002 07:40 AM
Alan check your PM

rascaljc
Dirt Roller

Total posts: 12
posted December 29, 2002 02:53 PM
quote:
Originally posted by AlanP2:
Just getting started in late model,purchased an older Bullitt 4 bar. The only setup information I got with the car was some scaling sheets with only a few clues as to shocks and springs.Anyone have the Bullitt setups? I have checked the Bullitt racecar site and tried multiple emails with no reply.
Thanks for any help, Alan

I bought a 98 bullit and tried the same thing i called bullit chassis they took my email adress but i never did get anything either. If any one has the setups i would really apreciate it if you could send them to me as well. my email is dirtlatemodel23@aol.com


coletrickle119
Dirt Roller

Total posts: 11
posted January 04, 2003 08:07 AM
the same for me if you have any info on a older one 97 model realrodinc@aol.com thanks

NRG77
Dirt Full Roller

Total posts: 31
posted January 14, 2003 02:59 AM
Good luck to all you guys. We have an older Bullitt (afraid to say how old) and we are in the same boat. I spoke to Ray Calahan a while ago and he told me that he did not start to keep records on his chassis until a few years ago. No records or set up or anything on ours. I guess we'll just have to try a lot of combinations and see what works. Good luck.

Back to the Archives