posted March 04, 2002 06:23 PM
I bought an all magnesium bert this morning.While me and my brother were admiring it on my living room floor,he was talking too a guy on the phone and he said the mag. bell housings break on rough tracks.Have any of you guys ever broke one? the guy said the aluminum one is heavier,but 20% stronger.Anybodys comments and opinions will be greatly appreciated!
Beerbarron44 Dirt Newbie
Total posts: 4
posted March 06, 2002 08:44 AM
hmmm....we have a bert magnesium transmision, but we just have an aluminum bell. I thought magnesium was not only lighter but stronger too. If i wanted to spend the extra doe i would have one. also 20 perecent sounds like an aweful big number i would make sure before i gave it the heave hoe.
p.s. you may want to check out berttransmission.com......i was looking and see that they claim that their magn bellhousing is lighter and stronger.
[This message has been edited by Beerbarron44 (edited March 06, 2002).]
HEYWOOD Dirt Roller
Total posts: 8
posted March 13, 2002 08:24 PM
THE MAG CASE WILL BREAK YOU CAN BUILD A BRACE ON THE RIGHT SIDE COMING OFF THE BELL HOUSING AT THE BACK OF THE BLOCK TO THE TRANSMISSION BOLT 3/8 ROD WILL BE PLENTY TO SUPPORT IT HOPE THIS HELPS
racerwilson Dirt Full Roller
Total posts: 56
posted March 14, 2002 04:34 PM
mag bell is stronger and will only brake under a hard impact or installed wrong. need to index block crank bell an trans