posted February 04, 2002 07:21 PM
Hey Guys My buddy has a GM power glide and wants to install a clutch relief bypass valve, can anyone help with advise or point me in the direction of a web page where this information is. Thanks Roy
race8k Dirt Forum Racer
Total posts: 98
posted February 06, 2002 07:23 PM
I think TCI sell the valve body to convert it and they are a sponsor of this board.
Donnie Ross Dirt Maniac
Total posts: 109
posted February 20, 2002 07:30 PM
drill the front pump on the pressure and suction side tap for 3/8 pipe thread,also forgot to mention take the pump apart first, then after the fittings are installed grind off any exess fitting sticking thru to the inside of the pump, reassemble pump be sure ti use a new gasket when putting back into trans if this leaks it will act just like the dump valve is open.