posted August 29, 2000 11:05 AM
On a 4 Bbl Alcohol motor with C&S carb, the front end of the fuel log goes to the fuel pump, correct? Where does the back end go? Fuel regulator? Does it get blocked off? Fuel pressure gauge? HELP please!!! Thanks
ScottGreer Dirt Full Roller
Total posts: 28
posted August 29, 2000 03:36 PM
What type of pump do you run? We run a stock style pump on our mod motors and block off the return and have no fuel troubles. When using a belt style pump, so much volume is put into the carb, a return line should be used.
Limited5 Dirt Maniac
Total posts: 141
posted August 30, 2000 09:45 PM
I run a stock location pump on gas w/fuel log. I just block the thing off also. I have a hole tapped into the side of the log that I located a fuel pressure gauge. Never had a single problem.
ctr9 Dirt Roller
Total posts: 6
posted September 09, 2000 09:27 AM
the front goes to fuel pump the little one on back goes to fuel pres. gauge, if you mount the gauge in the **** pit you should have an isolater before it gets to the gauge