Visit The Dirt Forum for More Information

Author Topic:   Oil Temp
wildman3
Dirt Roller

Total posts: 5
posted May 10, 2000 12:24 PM
What is to hot for oil temp. Last week our oil temp pegged out at 280. Althought our water temp only reach 220. I shut the car down was this the right thing to do? I've heard that the oil temp doesn't matter, how ever I've also heard that a 30 to 40 degree split is all you want. We're running alcohol. Any info would be great.
Thanks Jim

blaze
Dirt Roller

Total posts: 14
posted May 10, 2000 12:39 PM
Sounds like you're maybe a little lean---200 degrees water should be optimum on alky---we needed small oil cooler for our 430 to keep oil below 250. 280 is too hot---non-synthetic oil starts breaking down at 300. Hope this helps.

jammin
Dirt Administrator

Total posts: 3279
posted May 10, 2000 12:46 PM UIN: 16262997
Where do you connect your oil cooler on a deal like that?

X-1R Guy
Dirt Maniac

Total posts: 101
posted May 10, 2000 01:51 PM
Oil temp. should be within 20 to 30 degrees of water temp. never more. Water temp. should be around 200 - 210 at the most. I hear they make an engine treatment called X-1R (wink wink) that all the Hav-A-Tampa guys use. It will bring that oil temp. down an honest 20 to 30 degrees! www.x1r.com

blaze
Dirt Roller

Total posts: 14
posted May 11, 2000 12:53 PM
jammin,
Dry sump pump---pressure out-thru filter-thru cooler-to motor.
(thanks for the nice site)

[This message has been edited by blaze (edited 05-11-2000).]

jammin
Dirt Administrator

Total posts: 3279
posted May 11, 2000 02:27 PM UIN: 16262997
What about a wet sump ordeal? Thanks we are trying hard to make this a good site for everyone to use.

blaze
Dirt Roller

Total posts: 14
posted May 11, 2000 02:52 PM
When we ran wet sump we used remote oil filter setup and put cooler after filter. Adapter bolts to stock filter location---has ports for lines to make a loop---out of adapter---thru filter and cooler---back to adapter.

jammin
Dirt Administrator

Total posts: 3279
posted May 11, 2000 03:00 PM UIN: 16262997
Thats what I thought, but I didnt know if I was missing something.

Back to the Archives