Visit The Dirt Forum for More Information

Author Topic:   done racing selling EVERYTHING!!!!
superstock#81
Dirt Maniac

Total posts: 184
posted February 28, 2003 12:18 AM
1999 speedway chassis roller $1500
will consider stripping...

2 350 2 bolt main blocks
2 350 4 bolt main blocks
2-3speed tranns single ring on input shaft
4 aluminum bell housings
4 metric lower control arms
modified body panels and interior
1 street stock car kinda stripped
3 sets double hump 202 heads
2 422 lift camshafts
2 522 lift camshafts
25 street stock tires
1 390 ford eng complete
1 351 cleveland block and heads
1 set new 30 over pistons and rods
1 set valve covers
1 set msd plug wires with chrome wire loom
1 short 950lb spring
2 cast iron 4bbl intakes
2 cast 2bbl intakes
1 cast canadian 2 bbl intake

must sell due to i am getting out of racing found a new calling will be playing with 4x4's. if interested in any of the parts above email me at fast_t_performance@yahoo.com or call me at 303-717-9820

thanks
shane
fast times performance
agate colorado

2nd2none
Dirt Freak

Total posts: 368
posted February 28, 2003 12:28 AM
check your PM's

Scoot
Dirt Freak

Total posts: 330
posted February 28, 2003 07:26 PM
I'm interested in some of your stuff, but I had a question. Didnt you have a wrecker for sale? Can you give me some info on that please.

------------------
Scoot
Smith Racing Team
870-365-5989

superstock#81
Dirt Maniac

Total posts: 184
posted February 28, 2003 10:02 PM
wrecker is gone

neil rucker
Dirt Maniac

Total posts: 181
posted February 28, 2003 10:26 PM
very interested in 3 speed trannys. 1 ring on inputshaft? what is the second gear ratio on a 1 ringer? pm or call me at (770) 740-1532 thanks. neil

neil rucker
Dirt Maniac

Total posts: 181
posted February 28, 2003 10:28 PM
interested in street stock car too. pm or call. thanks. neil (770) 740-1532

superstock#81
Dirt Maniac

Total posts: 184
posted March 01, 2003 12:26 AM
second gear is a 1.51

neil rucker
Dirt Maniac

Total posts: 181
posted March 02, 2003 02:36 AM
i would like to buy the trannys. where are you located? please call me or pm with your nunber. i need trannys by next week. my # is (770) 740-1532 thanks. very serious. neil

neil rucker
Dirt Maniac

Total posts: 181
posted March 02, 2003 02:43 AM
i really should get off the net now, its 4:30 am here. my mistake ihave your number already. its so late im not thinking clear. i will call you tomorow. thanks

budman14
Dirt Roller

Total posts: 11
posted March 02, 2003 04:17 PM
i would be interested in the heads how much per set and for all 3 sets

superstock#81
Dirt Maniac

Total posts: 184
posted March 03, 2003 01:06 PM
i have one set that was just redone asking 250 for that one and the other two need to be done asking 100 for each of those two sets

superstock#81
Dirt Maniac

Total posts: 184
posted March 04, 2003 01:51 AM
heads gone, blocks gone, and canadian intake is gone

superstock#81
Dirt Maniac

Total posts: 184
posted March 05, 2003 06:45 PM
1999 speedway mod and body panels are gone

martnracn_91
Dirt Forum Racer

Total posts: 80
posted March 06, 2003 03:09 PM
Could you tell me more about the .30 over pistons and rod. Thank you.

superstock#81
Dirt Maniac

Total posts: 184
posted March 06, 2003 08:53 PM
they are already gone

martnracn_91
Dirt Forum Racer

Total posts: 80
posted March 07, 2003 02:17 PM
Thanks.

HRT187
Dirt Maniac

Total posts: 173
posted March 07, 2003 02:44 PM
How much for the bellhousings?

EVANSRACING24E
Dirt Forum Racer

Total posts: 80
posted March 07, 2003 07:37 PM
what are the tires?

superstock#81
Dirt Maniac

Total posts: 184
posted March 07, 2003 08:50 PM
asking 20 each bell housing. tires are hoosiers, goodyears, and mcrearys. i think i spelled that wrong but oh well

rowdygirlracin20
Dirt Roller

Total posts: 10
posted March 11, 2003 12:24 PM UIN: 20
what size are the tires, and how much ya want for them

Back to the Archives