Visit The Dirt Forum for More Information

Author Topic:   brodex heads
CUZZ45
Dirt Roller

Total posts: 15
posted February 18, 2003 08:43 PM
I HAVE TWO SETS OF BRODEX ALUM HEADS FOR SALE 1 #8'S 1 #10'S BOTH SETS ARE SET UP WITH 7/16 STUDS AND GUIDE PLATES ,STANLESS VALVES& ROLLER SPINGS AND ARE FRESH AND READY TO BOLT ON. #8'S $750.00 #10'S$850.00 OBO.#THE 10'S GOT NEW GUIDES AND NEW SURFACE BEFORE THIS SEASON I ALSO HAVE A PORT MATCHED VIC J.R. INTAKE FOR THE 10'S $125.00 BOTH ARE SPREAD PORT EX. I AM GOING TO RUN IMCA THIS YEAR (STEEL HEADS) POSSABLE TRADE

mod95b
Dirt Roller

Total posts: 8
posted February 19, 2003 05:10 PM
how old are the 10's and have they ever been hurt or repaired . what runner is it, valve size and springs. I have a set of iron eagles with about 15 nights on them, and considering going to the aluminum heads instead. iron eagles have been ported, bowlblendedand gasket matched to 1206 fel pro intake gasket. 208 160 valves 215cc runners, 1.550 roller springs.

CUZZ45
Dirt Roller

Total posts: 15
posted February 19, 2003 09:31 PM
i bought the heads used i ran them two seasons the first season i broke a head stud and had to have repaired between two cyl. i spent $500. on them this last off season and ran them all year. i think the runners are 230cc they use 1206 gaskets the rest, valves etc.are same as yours. they are spread port ex.and i will sell my shortie headers too.

RACR 73s
Dirt Roller

Total posts: 7
posted February 21, 2003 06:47 PM
I have 3 different sets of steel heads and would be willing to trade with you. E-mail me with your phone # and I will call this weekend and see if we can work something out.

Thanks,
Scott
schoeners@bwsys.net

[This message has been edited by RACR 73s (edited February 21, 2003).]

Back to the Archives