Visit The Dirt Forum for More Information

Author Topic:   vortec heads
b00
Dirt Full Roller

Total posts: 57
posted September 17, 2002 06:22 PM
1 set of vortec cyl heads NEW not take offs
they have 3hrs of dyno time only complete with rockers 300.00 b/o
also have a set of 882 used

imca63
Dirt Full Roller

Total posts: 44
posted September 18, 2002 07:52 AM UIN: 10123471
How much for the 882's? Email or call mnewman@worldcommail.net or 913-208-8900. Location would be nice as well.

dode
Dirt Freak

Total posts: 417
posted September 18, 2002 09:24 AM UIN: 13209501
Are these stock vortec's? Do they have stock springs in them? Also, where are you located? Thanks.

John

b00
Dirt Full Roller

Total posts: 57
posted September 18, 2002 07:09 PM
the heads have stock springs good to 550 lift and 194-16 valves they are the ones that are complete from the gm peformance book
open to any reasonable offer

b00
Dirt Full Roller

Total posts: 57
posted September 18, 2002 07:10 PM
opps im in mich but can ship anywhere

dode
Dirt Freak

Total posts: 417
posted September 19, 2002 07:27 AM UIN: 13209501
Were the heads machined before the springs were put on because I have read that without machining the castings, anything over like .450 lift will bind on the casting. If this is a yes, I am interested in purchasing your heads.

John

b00
Dirt Full Roller

Total posts: 57
posted September 19, 2002 07:08 PM
this may be they are stock as they came out of the box they have had no machine work done on them

dode
Dirt Freak

Total posts: 417
posted September 19, 2002 10:21 PM UIN: 13209501
Please email me at ksu_engineer@yahoo.com and we can talk more. Do you have any pics? Thanks.

John

b00
Dirt Full Roller

Total posts: 57
posted September 28, 2002 05:49 PM
the heads are sold
thanks everyone

Back to the Archives