Visit The Dirt Forum for More Information

Author Topic:   turnkey mods for sale and parts
HOTWIRE
Dirt Full Roller

Total posts: 40
posted August 26, 2002 09:58 AM
96 BOYD MODIFIED- 383 by Green Country, ernieglide tranny, floater rear end,shocks, springs, and sliders are good.New bumpers,nerfs, and body,tach and temp/pressure gauges. Your choice of one gearset.Chassis being painted and ready for assembly.Will deliver ready to race. $6000.00
98 PERFORMANCE WEST MODIFIED-engine by BOBS MACHINE in Hulbert, 3 speed saginaw,ram assault 5.5" triple disc clutch, needs bell housing or can run a powerglide as is. Floater rear end. Your choice of one gearset. Shocks,sliders , and springs are good. memory tach,msd with rev limit,body in fair shape, will deliver with new nerfs and bumpers.$6000.00
OTHER PARTS
floater rear end w/ metric caliper brackets-$350
20 tires-$15 to $50 ea depending on tread
6 beadlocks-$70 each
2,3,4,5,off wheels some new in box-$20 to $30 ea
gearsets-2x 5.83- 2x 5.67-2x 5.43 $250 ea
9" pumkin-$50
short and long yoke- $15 ea
355 engine- no time since rebuild-$1200
383 engine- vortec heads,victor jr intake , alky carb-$2500
355 block and parts complete pan to intake. block needs cylinder wall checked. roller rockers,arp studsand bolt,victor jr intake,baffled pan,alky fuel pump,-$800
complete metric steering components,metric spindles,camaro spindles,steering boxes,upper addustable control arms,metric lowers,camaro lowers,metric calipers and pads and whatever else is hid in our shops- call if you need it, if I have then make offer
1- bushore powerglide needs clutches-$200
1-stock powerglide needs clutches-$100
also have quick connect hoses and valve for glide setup-buy a case and you have to take the hoses-thanks!
TCI valve body- no need to run a valve-$35
Thats all I can remember . I will post more if I find it when I clean out shop.
If you dont like the price then reply to this thread and plead your case but I want to move all this stuff out. Reply to this thread if you are interested in anything and I will give you my phone number in a private mailing

modracr41
Dirt Full Roller

Total posts: 71
posted August 28, 2002 07:57 PM
Send me an email to let me know how to get in touch with you. I'm looking for a floater rearend for a mod. I need a 58" preferably, or would settle for a 60". My email address is modracr41@hotmail.com Thanks, Brad Quinn

ray14
Dirt Full Roller

Total posts: 67
posted September 04, 2002 10:50 PM
i would be interested in some engine parts email me with list of parts u have and price plz and how i can get in touch with you thanks.

Back to the Archives