Visit The Dirt Forum for More Information

Author Topic:   Ross sbc pistons
dode
Dirt Freak

Total posts: 417
posted April 10, 2002 02:10 PM UIN: 13209501
I have a full set of slightly used Ross sbc pistons. They are 412XL forgings, and are 4.1144-4.1145 skirt diameters. They have been lightened as there is some material removed from under the dome. The pistons have a measured compression height (digital calipers) of 1.216" and a dome volume of -20cc's. These would make great pistons for a claimer motor. Here are links to 4 pictures of the pistons. As you can see, they are in very good condition and have very little run time on them. They have rings on them, but of course I would suggest they be replaced as cheap insurance. $150 for the set, obo. These are well over $600 new, so this is a steal. Let me know if you have any questions.
http://members.tccoa.com/dode/ross1.jpg http://members.tccoa.com/dode/ross2.jpg http://members.tccoa.com/dode/ross3.jpg http://members.tccoa.com/dode/ross4.jpg

John

dode
Dirt Freak

Total posts: 417
posted May 14, 2002 08:49 AM UIN: 13209501
still for sale

NYhick
Dirt Forum Racer

Total posts: 82
posted May 14, 2002 08:53 PM
Are these pistons for a stock bore?

dode
Dirt Freak

Total posts: 417
posted May 14, 2002 10:39 PM UIN: 13209501
yup, sure are.

John

Back to the Archives