Visit The Dirt Forum for More Information

Author Topic:   Nissan Mini Stock/Modified New Motor
cowboyracinginc
Dirt Roller

Total posts: 14
posted January 22, 2002 08:21 PM
New Z22 stroker motor. Block is a Z22 and has had the interior ground and polished for crank clearence,deck has been milled so pistons are .005 above deck, all oil gallery soft core plugs removed and tapped for ***** in plugs, cylinders have been O-ringed. Crank is a Z24 has had the counter weights cut for clearence in block, polished and fully balanced, mains are .010 under and rods are .010 under. Rods are Z20 6" and are fully polished, resized, balanced, and are setup for full floating pins. Pistons are JE flat top with valve reliefs. Head is a U67 casting L series, combustion chambers have been welded and cc to 32-35cc's each, valves are Manley SS 1.50 and 1.73, springs are rated at .600+ lift and are Comp. cams, new retainers and keepers, cam is a Comp. cam .595 lift. comes with a 10,000 rpm ATSUGI racing single disc clutch and pressure plate. this motor will produce 300+ HP very fast and reliable. This motor has never been fired and is new from top to bottom. over $6,000.00 invested SALE FOR $3,500.00 (moving up to Late Model) will also sale 82 200SX rolling chassie with lots of extras(trannies, chunks,blocks, etc.) with a complete race ready Z20 motor with a Lseries head for $2,500.00
can contact me at Home: 985-882-7764 after 7pm - Cell: 504-415-6781 - e-mail Cowboyracinginc@cs.com

cowboyracinginc
Dirt Roller

Total posts: 14
posted January 28, 2002 08:04 PM
Still have the motor, ant one interested??????????????????????????

cajunracer88
Dirt Maniac

Total posts: 106
posted March 13, 2002 03:37 PM
do you still have the 200sx and how much you want for it my brother runs a 81 200sx and i am interested in running one like it. i am located in lafayette,louisiana. where are you located

Back to the Archives