Visit The Dirt Forum for More Information

Author Topic:   Parts for sale and looking for parts!
team49
Dirt Full Roller

Total posts: 30
posted January 24, 2001 05:42 PM
Parts I have for sale are
1.Muncie with 2 gears removed,Tilton ULGC bellhousing setup w/flywheel reverse mounted starter,5.5 triple disk,kisoski throw out bearing.Opening in bellhousing for kse pump( pump not included)WILL TAKE 700.00



WANTED

. Comptete brinn tran system ,need to have kse pump hole in bell.
.Layne trans setup ,kse mount on bellhousing

------------------


[This message has been edited by team49 (edited January 25, 2001).]

[This message has been edited by team49 (edited January 26, 2001).]

[This message has been edited by team49 (edited February 13, 2001).]

[This message has been edited by team49 (edited March 21, 2001).]

[This message has been edited by team49 (edited March 21, 2001).]

jracer
Dirt Roller

Total posts: 9
posted January 25, 2001 03:36 PM
Shoot me the price on the coupler and the barrel valve.
Thanks
Jay
Dallas

jracer
Dirt Roller

Total posts: 9
posted January 25, 2001 03:37 PM
sorry...
jracer98@att.net

bizkit
Dirt Roller

Total posts: 25
posted January 30, 2001 02:05 PM
I have a 360 sbc, I run in a super latemodel
last season, crower billet crank, eagle rods,wiseco 3.5 domes,crower roller cam, and lifters 4.060 block just 10 races on block no ring groove. 10x brodix heads ported and polished by Boyd's matching eldlebrock intake, heads are fresh just bolt on, engine is desassembled and ready for new rings and bearings, reason for sale is I'm building a all alum. 358 and I have a big motor so I don't need this one..Dyno'ed at
635Hp and 603 ft lbs trq.

Kelly Hanvey
location: North Alabama, could deliver in a 150 mile radius.
hanvey@corrcomm.net
256-552-6343(days)
256-775-6371 (nights)

[This message has been edited by bizkit (edited January 30, 2001).]

DirtMod9
Dirt Roller

Total posts: 10
posted January 30, 2001 10:13 PM
358 SBC with a Roller Cam, 4 bolt main, Scat Crank, Balanced assembly, Double Hump Heads with 2.02 Valves, Edelbrock Victor Jr. Intake, Circle Track Pan, Aluminum Water Pump, Aluminum Pulleys, Aluminum Fan, (no distributor or carburetor) Only 5 nights on it! $3300

dirt mod 70
Dirt Full Roller

Total posts: 35
posted February 09, 2001 04:28 PM
would you sell the clutch separate?? and if so , how much
thanks
mark

team49
Dirt Full Roller

Total posts: 30
posted February 13, 2001 04:12 PM
quote:
Originally posted by dirt mod 70:
would you sell the clutch separate?? and if so , how much
thanks
mark

I'll take 800 + shipping for everything don't want to start parting out!
Thanks for your interest.
Wayne

[This message has been edited by team49 (edited February 13, 2001).]

Back to the Archives