Visit The Dirt Forum for More Information

Author Topic:   mods and spares for sale
HOTWIRE
Dirt Full Roller

Total posts: 40
posted September 01, 2002 11:31 PM
--------------------------------------------------------------------------------
Make an offer on any of this I want to get rid of it quick!!!!!!!!
96 BOYD MODIFIED- 383 by Green Country, ernieglide tranny, floater rear end,shocks, springs, and sliders are good.New bumpers,nerfs, and body,tach and temp/pressure gauges. Your choice of one gearset.Chassis being painted and ready for assembly.Will deliver ready to race. $6000.00
98 PERFORMANCE WEST MODIFIED-engine by BOBS MACHINE in Hulbert, 3 speed saginaw,ram assault 5.5" triple disc clutch, needs bell housing or can run a powerglide as is. Floater rear end. Your choice of one gearset. Shocks,sliders , and springs are good. memory tach,msd with rev limit,body in fair shape, will deliver with new nerfs and bumpers.$6000.00
OTHER PARTS
floater rear end w/ metric caliper brackets-$350
20 tires-$15 to $50 ea depending on tread
6 beadlocks-$70 each
2,3,4,5,off wheels some new in box-$20 to $30 ea
gearsets-2x 5.83- 2x 5.67-2x 5.43 $250 ea
9" pumkin-$50
short and long yoke- $15 ea
355 engine- no time since rebuild-$1200
383 engine- vortec heads,victor jr intake , alky carb-$2500
355 block and parts complete pan to intake. block needs cylinder wall checked. roller rockers,arp studsand bolt,victor jr intake,baffled pan,alky fuel pump,-$800
complete metric steering components,metric spindles,camaro spindles,steering boxes,upper addustable control arms,metric lowers,camaro lowers,metric calipers and pads and whatever else is hid in our shops- call if you need it, if I have then make offer
1- bushore powerglide needs clutches-$200
1-stock powerglide needs clutches-$100
also have quick connect hoses and valve for glide setup-buy a case and you have to take the hoses-thanks!
TCI valve body- no need to run a valve-$35
Thats all I can remember . I will post more if I find it when I clean out shop.
If you dont like the price then reply to this thread and plead your case but I want to move all this stuff out. Reply to this thread if you are interested in anything and I will give you my phone number in a private mailing.


poboy2
Dirt Freak

Total posts: 219
posted September 01, 2002 11:49 PM
Interested in a 60" floater. What brand is it? Thanks

racerSRE
Dirt Roller

Total posts: 6
posted September 02, 2002 07:55 PM
would like to talk to you about the valve body and adjustable a arms.

HOTWIRE
Dirt Full Roller

Total posts: 40
posted September 02, 2002 10:01 PM
The rear end is from speedway I think but will verify. It has solid 31 spline axles.

The valve body is from TCI. Call 918-299-5036 and ask for Daniel if you want to talk about it. You will probably have to leave a message but I will call you back. Thanks.

Caveman15
Dirt Forum Racer

Total posts: 82
posted September 08, 2002 09:41 AM
I am interested in your Gear sets, are they 28 or 31 spline? Do they have mini spools or full spools? Is this the least you would take for them, and do you have any idea what it would cost for shipping for three or more?
Caveman

Back to the Archives