Visit The Dirt Forum for More Information

Author Topic:   turnkey mods for sale and parts
HOTWIRE
Dirt Full Roller

Total posts: 40
posted August 26, 2002 08:25 AM
96 BOYD MODIFIED- 383 by Green Country, ernieglide tranny, floater rear end,shocks, springs, and sliders are good.New bumpers,nerfs, and body,tach and temp/pressure gauges. Your choice of one gearset.Chassis being painted and ready for assembly.Will deliver ready to race. $6000.00
98 PERFORMANCE WEST MODIFIED-engine by BOBS MACHINE in Hulbert, 3 speed saginaw,ram assault 5.5" triple disc clutch, needs bell housing or can run a powerglide as is. Floater rear end. Your choice of one gearset. Shocks,sliders , and springs are good. memory tach,msd with rev limit,body in fair shape, will deliver with new nerfs and bumpers.$6000.00

OTHER PARTS
floater rear end w/ metric caliper brackets-$350
20 tires-$15 to $50 ea depending on tread
6 beadlocks-$70 each
2,3,4,5,off wheels some new in box-$20 to $30 ea
gearsets-2x 5.83- 2x 5.67-2x 5.43 $250 ea
9" pumkin-$50
short and long yoke- $15 ea
355 engine- no time since rebuild-$1200
383 engine- vortec heads,victor jr intake , alky carb-$2500
355 block and parts complete pan to intake. block needs cylinder wall checked. roller rockers,arp studsand bolt,victor jr intake,baffled pan,alky fuel pump,-$800
complete metric steering components,metric spindles,camaro spindles,steering boxes,upper addustable control arms,metric lowers,camaro lowers,metric calipers and pads and whatever else is hid in our shops- call if you need it, if I have then make offer
1- bushore powerglide needs clutches-$200
1-stock powerglide needs clutches-$100
also have quick connect hoses and valve for glide setup-buy a case and you have to take the hoses-thanks!
TCI valve body- no need to run a valve-$35
Thats all I can remember . I will post more if I find it when I clean out shop.
If you dont like the price then reply to this thread and plead your case but I want to move all this stuff out. Reply to this thread if you are interested in anything and I will give you my phone number in a private mailing.


marple
Dirt Maniac

Total posts: 117
posted August 26, 2002 05:26 PM
is the 98 mod available w/o the engine?
also where are you located?

HOTWIRE
Dirt Full Roller

Total posts: 40
posted August 26, 2002 05:33 PM
The 98 is available for $3000.00. The car is in great shape. I am in Tulsa, OK. I am selling to pursue other type of racing so the roller will come with good equipment.I can maybe meet you if the distance is not too far. Thanks.

motorsport 18
Dirt Full Roller

Total posts: 70
posted August 26, 2002 08:19 PM
how wide is the rear end what all comes with itwhat spline axles

HOTWIRE
Dirt Full Roller

Total posts: 40
posted August 26, 2002 08:27 PM
I will check the rear end width. I have three of them and I think one is narrower. The rear end has metric brake brackets.Axles(I have 28 and 31 spline) drive flanges(aluminum).Welded tube brackets setup for a 3 bar. I will sell a gearset,rear end,and rebuilt metric calipers for $500. Or the rear end alone for $350.It is in great shape.

HOTWIRE
Dirt Full Roller

Total posts: 40
posted August 27, 2002 07:50 AM
56 " width on the axle and 31 spline.

All times are ct (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply  
Hop to:

Contact Us | HRS Applications

All Rights Reserved!


Ultimate