Visit The Dirt Forum for More Information

Author Topic:   Jig mod mini stock
mrfasttrack
Dirt Roller

Total posts: 15
posted May 15, 2002 01:58 PM
Was in Alabama racing over the weekend and
was running against a couple of jig framed mod mini stocks( looks like a mini late model)Tried to get info from the guys that had the cars with no luck. Does any one build these chassis anywhere? Will take 2 if I can find them


Bill

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 639
posted May 16, 2002 06:06 PM
I helped build a couple of them about 4 years ago. i didnt design them i just helped bend the tubing and weld them up. If you could get pictures of them and maybe some measurments i could do them i can use my mod jig.

ministock
Dirt Full Roller

Total posts: 31
posted May 16, 2002 09:17 PM
there is a guy here in north alabama that is building them to accept mustang2 and3 and pinto parts the bare chas is 1000 i will try to find his name and number for you. where do you live

mrfasttrack
Dirt Roller

Total posts: 15
posted May 17, 2002 08:16 PM
Live in Dallas Georgia. About 20 minutes from Alabama. Race alot over at Penton Al.

WILL TAKE 2 OF THEM. IF THERE GOOD, WILL TAKE ANOTHER 2

BILL

ATLNIGHTSTALKER@AOL.COM

mrfasttrack
Dirt Roller

Total posts: 15
posted May 19, 2002 02:04 PM
Can probably get some pics of the cars. As far as any measurements, that's going to be interesting.


bill

Back to the Archives