Visit The Dirt Forum for More Information

Author Topic:   drum to disk
RACEINMUD
Dirt Forum Racer

Total posts: 76
posted December 26, 2002 01:34 PM
I have an 70's Buick with front drums and wanting to go to disk. Looking for advice. Thanks


redneck racing
Dirt Freak

Total posts: 276
posted December 30, 2002 06:03 PM
Someone can correct me if im wrong. I had the same problem with my 73 Nova I pulled the drums off and got a set of rotors and i'll be darned if they didnt go right on it was a pretty easy job. calipers bolted right up and everything. I'd say to find one with rotors and just switch them out. Eddie

RACEINMUD
Dirt Forum Racer

Total posts: 76
posted February 19, 2003 03:12 PM
I have a 1972 Buick skylark. Can anyone tell yr, make & model to get disk off to fit. Thanks.

Bumper sticker: If you can read this, I'm not last!

rico 08
Dirt Freak

Total posts: 372
posted February 19, 2003 08:40 PM
if i'm thinking right that is a two peice spindle so just replace the tie rod and spindle part and you don't even have to touch the rest.

Pickel
Dirt Forum Champ
Total posts: 564
posted February 20, 2003 01:39 PM UIN: 25419780
I beleive you can take the spindles off of pontiac lamans, chevelle,may be and mid size car up to 77-78 and change them over I could be wrong..

Back to the Archives