Visit The Dirt Forum for More Information

Author Topic:   GM 7.5 inch, 10 bolt rear ends
Speed Racer X
Dirt Full Roller

Total posts: 61
posted December 23, 2002 06:55 PM
I need a good set of 3.73 gears and carrier for a 7.5 inch 10 bolt. I was told that a S-10 4X4 (possibly a 4 cylinder) had 3.73 gears, is this true? Thanks for the help, and Merry Christmas!!!

LUBEGUY07
Dirt Maniac

Total posts: 156
posted December 23, 2002 07:41 PM
yes that is true some even had 4.10 in them

martnracn_91
Dirt Forum Racer

Total posts: 80
posted December 24, 2002 12:21 AM
A good way of finding out other than pulling the cover! Open the glove box and find the manufacturers sticker, look for the "GT" code. If it is followed by a 3 it is a 308,4=3.73 and5=4.10. I hope this helps. I've been getting them that way for two years now.

30rulz
Dirt Roller

Total posts: 24
posted December 31, 2002 05:47 PM
what rearend do you use to put the gears in from the s-10 in? as i tried a 10" from a nova and the ring gear from the s-10 has 10 bolts in the ring gear and the nava has 8

Speed Racer X
Dirt Full Roller

Total posts: 61
posted December 31, 2002 08:31 PM
77 and up all GM models exc. Monza/Vega/Starfire, 82 up Camaro/Firebird, 83 up S-series and Astro. Our car is a 79 Caprice we used gears out of a Monte Carlo (metric) and also S-10 gears.

Back to the Archives