Visit The Dirt Forum for More Information

Author Topic:   Brzezinski 2bbl intake
racer13
Dirt Full Roller

Total posts: 27
posted November 12, 2002 05:28 PM
Did a brzezinski intake come stock on a sbc 350? And if so what year? And if not a brzezinski then what other 2bbl should I get.Has to be cast. Thanks

uforacing51
Dirt Freak

Total posts: 349
posted November 12, 2002 08:05 PM
Brzenski manifolds are good stuff, but I don't believe they ever came stock on any chevy engines. Get the Brez

fairlaniac
Dirt Full Roller

Total posts: 74
posted November 12, 2002 08:30 PM
It's all aftermarket work done to a stock cast iron intake. They have various stages and heads too! Here is Brzezinski's web site. http://www.castheads.com/

------------------
Doug
"Lift for a second, that's where you'll finish!"

racer13
Dirt Full Roller

Total posts: 27
posted November 12, 2002 09:51 PM
Great Thanks. What is the best stock 2 bbl. cast intake I can get. It has had to be stock on sbc 350? Thanks Bill

KPLugnut
Dirt Freak

Total posts: 408
posted November 13, 2002 07:53 AM
Hang onto your wallet, because Brzezinski is VERY proud of their stuff.....They do good work and all but quite often, racers have a hard time spending $600 on an intake.

KP

Racerboy13
Dirt Roller

Total posts: 21
posted November 24, 2002 01:23 PM
A great Chevy 2 bbl intake is the Canadian intake. They were stock, but they are somewhat hard to find unless you go to swap meet and sometimes they are even hard to find there. They work really well, i am searching for one myself. They have Canadian stamped on one of the intake runners, thats how you can tell it is one. If you have any more questions you can email me at Racerboy13X@netscape.net

66jj
Dirt Freak

Total posts: 352
posted November 24, 2002 06:20 PM
I HAD A GUYS E MAILS IN CANADA WITH AT LEAST 10 AT ONE TIME, I WILL LOOK FOR ONE OF HIS ADDS THIS WEEK, WHEN I HAVE TIME AND POST IT FOR YOU ALL. HE WANTED 60.00 EACH, SHIPPING IS AROUND 20-25...

Smitty77
Dirt Roller

Total posts: 9
posted December 03, 2002 11:29 AM
I see these intakes on ebay often. Might want to check it out there are a few on there now.

jhon hollomon
Dirt Maniac

Total posts: 181
posted December 03, 2002 11:54 AM
What is special about these intakes. Do they have better flow. What did they come on. I've got one in my stockpile but I had no idea it was different.

Rvarc
Dirt Newbie

Total posts: 3
posted December 03, 2002 09:35 PM
I've been getting my intakes from C60 chevy trucks that have 350 engines in them.I've always call them the 500 and the smaller ones that are more commen the 350 I use the 500's and 350 holley's .If your use one of the smaller ones with a 500 funnel the adapter plate to the smaller size. Both of those intakes are great torqu intakes and help pull of the corners good,I don't have the hi end lean out that you get some time with the adapter to four barrel units

Back to the Archives