posted August 04, 2002 11:06 PM
i have to take the weight jacks out of a camaro i bought so i can run pure stock.. can i reuse the springs? if not what would be a good setup on a med. banked clay 3/8 tacky track? i need #'s for front and rear springs and shocks, car weighs 3500, motor is setback and car already has landrums in rear thanks alot
redneck racing Dirt Freak
Total posts: 276
posted August 05, 2002 02:42 PM
If it were me id leave the jacks in and run it in the class above if jackers are ok. If you do take them out Speedway makes a stock type racing spring about 12" tall or get the adjustable sleeves. Eddie
bryanb30 Dirt Forum Racer
Total posts: 98
posted August 05, 2002 09:28 PM
i just want to run in the cheapest class so the jacks have to go, i need someone to help me with spring rates and shocks... my rules say stock type shock in stock location,....
merlinmech Dirt Full Roller
Total posts: 51
posted August 05, 2002 09:39 PM
If you know what springs you have now, get some water pump pulleys to put on top of your front springs. Just cut a hole in the center for shock. Use different sizes to jack weight.