Visit The Dirt Forum for More Information

Author Topic:   turbo 350
intimidtr3
Dirt Full Roller

Total posts: 32
posted June 25, 2002 09:51 PM
I was wanting to know what you have to do to bolt a sbc 350 to a buick or olds th350 trans.Thanks.

AC156
Dirt Freak

Total posts: 295
posted June 25, 2002 10:03 PM
well...that it what we are running right now. the bottom two bolt holes and the pins will line up,,,,,,we made a bracket for the two middle bolts and we drilled the case for the top two bolts. they do make adapters for that combination, but we didnt want to spend the extra money.

racer17j
Dirt Forum Champ
Total posts: 1565
posted June 26, 2002 02:07 AM UIN: 54865418
speedway has the plate for this for $40 but kinda like ac did it would be pretty ez to make your own with a piece of 5/16 metal like he said the side holes are the same so cut it out to clear the comverter and flywheel
then find an old junk block or chevy tranny and drill all the holes bolt it to the block then take your gm tranny and bolt it up and drill the new holes in your mounting plate and bolt it up will cost about $10 you will probably have to shim your converter also we just use washers

[This message has been edited by racer17j (edited June 26, 2002).]

Back to the Archives