Visit The Dirt Forum for More Information

Author Topic:   ride height on a camero
68chunks
Dirt Roller

Total posts: 8
posted April 02, 2002 10:03 PM
My buddy is running a camero and we were looking at it tonight and the front end set lower than the back. Is this the way you want it on that kind of car? I said I thought he needed to raise the front end up.
I was wondering.

rcf5r
Dirt Roller

Total posts: 9
posted April 05, 2002 08:04 PM
I ran a camero for 4 years and i set the front up so the lower control arms was level then adjusted the rear to match you want the same ride hight front and rear

hoganhomer
Dirt Full Roller

Total posts: 27
posted April 07, 2002 11:33 PM
I don't remember where I read it but I've got written down here that on a dirt track car a good starting point is: LF=4.5", RF=5", LR=5.5", and the RR=6". This is supposed to be before the weight is distributed.

NYhick
Dirt Forum Racer

Total posts: 82
posted April 08, 2002 09:17 PM
Hoganhomer, where are you measuring from when you get these measurements?

redneck racing
Dirt Freak

Total posts: 276
posted April 10, 2002 08:08 PM
I ran on asphalt for years and started on dirt last year i read some where that the ride height for dirt was 1" more than asphalt so i raised the car an inch on each side and came up 7" on the passenger side and 6" on the drivers side. Is this about right or should i go back to 6" and 5" ? Eddie

Back to the Archives