Visit The Dirt Forum for More Information

Author Topic:   Power steering pulley
PB II
Dirt Roller

Total posts: 21
posted February 04, 2002 01:43 PM
I have a chevy 350 (casting 0010) and I found a power steering mounting bracket off an '86 chevy van. I have a long water pump and am using deep V groove pulleys on the crank and water pump. Where can I get an inexpensive deep V groove pulley for a power steering pump. Currently I have a pump that has the press on style pulley. One other thing I may have over looked, is the 86 chevy van power steering mount designed for a long or short water pump?

redneck bubbas racing
Dirt Freak

Total posts: 213
posted February 04, 2002 08:34 PM
To the best of my knowledge nobody makes a pulley for it. I am sure that you can find a billet style in a street rod catalog. The 86 van will have a long water pump. It should also bolt to the block only. The van pumps are nice because you can use early model heads without ac. holes in them.

racer17j
Dirt Forum Champ
Total posts: 1565
posted February 05, 2002 01:17 AM UIN: 54865418
you shouldn't need a deep pulley just make sure you're lined up as true as posible and you should be alright with the stock one thats all i ever use haven't thrown a belt yet

PB II
Dirt Roller

Total posts: 21
posted February 05, 2002 09:15 AM
Thank you for the help

Flatlander
Dirt Freak

Total posts: 310
posted February 06, 2002 04:02 PM
Just a note don't overtighten the belt I always leave about 1/4" slack in mine

Back to the Archives