posted December 18, 2001 02:55 AM i just noticed today that my new car has one of the off set v6 cross members has anybody cut the mounting plate and moved it to the center so they don't have to use that screwy adapter to mount the tranny or is it totally diferent and i need to look for another that is straight up
mansfief Dirt Roller
Total posts: 18
posted December 19, 2001 03:06 PM
Racer17J, Is this on a metric frame? That cross member is bowed up on the passenger side to clear the converter. I welded a thick piece of angle iron on the fram rails and used a 1X2 inch tubing for the cross member. I welded some 1/4 inch metel where the bold were for extra support. Also put a piece of 2X3 tubing in side the frame rails to have somthing to weld to.
racer17j Dirt Forum Champ
Total posts: 1565
posted December 19, 2001 03:10 PM i would just make my own but it has to be stock they consider making your own as frame bracing and i can't do that