Visit The Dirt Forum for More Information

Author Topic:   spindles
sideways
Dirt Forum Racer

Total posts: 81
posted August 04, 2001 03:57 PM
I have a metric chassis 79 monte carlo.I need to know what cars I can get spindle from(year and make)?Need a left one.Would one from a 84 impala work?

RaceDoctor
Dirt Newbie

Total posts: 4
posted August 05, 2001 02:27 PM
Sideways, you need a spindle from any 1978 to 1987 GM G Body 108" metric frame(Monte Carlo,Gran Prix,Regal,or Olds Cutlass)..I'm
Not sure about the larger body cars that are considered metric frame, but the front end parts might work.

juni
Dirt Full Roller

Total posts: 29
posted August 06, 2001 12:09 AM
Be carful some of the 78 to 80 mid size have smaller wheel bearings 81 and up are bigger either one of the spindels will bolt on but the rotors won't interchange . I think s10 truck spindels will work also.

racer17j
Dirt Maniac

Total posts: 165
posted August 06, 2001 12:33 AM UIN: 54865418
the spindles on the chevy metric cars are longer than the others so if you get one from another metric you will have to use the rotor from it too

Racer0
Dirt Roller

Total posts: 20
posted August 09, 2001 08:12 AM
I use impala spindles on my monte frame. They are a little taller and wider than the monte spindles. Thus you also get the larger brakes from the impala.

ROGUE
Dirt Newbie

Total posts: 2
posted September 10, 2001 01:47 AM
74-78 Camaro Spindles bolt in and will also raise the front roll center. Be sure to
install them in pairs, don't mix the Camaro
piece with stock Metric Spindles.

Back to the Archives