NOTE:  This calculation has been corrected to incorporate banking into the equation so it will give you the EXACT stagger for the banking and radius of your track!

ENJOY!

Use decimal figures in these if they are 1/2 an inch, such as .5. 

Radius of the Track's Turn    (in feet! example, 200'):        

Circumference(Rollout) of the Right Rear Tire (in inches! ex 82")       

Rear end track width in inches!                                                            

 (center of tire contact patch to center of tire contact patch):

 Track Banking:(Whole Number Degrees (15 degrees = 15):     

The correct stagger for this combination is: in.

Left Rear tire should be inches in radius.